Sporting an excellent price-to-performance ratio, the TP-Link Deco X60 is among the go-to Wi-Fi 6 mesh systems for many users. Put simply, it can get the job done and then some. Then there’s the TP-Link Deco X20, which also offers a solid performance and plenty bang for your buck.
Between the two, the Deco X60 is more robust. While the Deco X20 is relatively slower, its speeds are fast enough for most people, and because it’s typically sold in packs of three, it usually has a wider coverage. However, that’s not all there is to them.
TP Link X20 vs X60 Comparison Chart
|Model||TP-Link Deco X20 (3-Pack)||TP-Link Deco X60 (2-Pack)|
|Price||Check Price||Check Price|
|Standard||Wi-Fi 6||Wi-Fi 6|
5 GHz: 1201 Mbps
2.4 GHz: 574 Mbps
5 GHz: 2402 Mbps
2.4 GHz: 574 Mbps
|Coverage||5,800 sq. ft.||5,000 sq. ft.|
|Capacity||Dual-Band, MU-MIMO, OFDMA, 4 streams||Dual-Band, MU-MIMO, OFDMA, 6 streams|
|Encryption||WPA, WPA2, WPA3||WPA, WPA2, WPA3|
|Ethernet||2 x Gigabit ports per unit||2 x Gigabit ports per unit|
|Dimensions (W x H x D)||4.33″ x 4.99″ x 4.33″||4.33″ x 4.99″ x 4.33″|
The TP-Link Deco X60 has faster speeds than the Deco X20.
Compared to traditional routers, mesh networks have a stronger focus on coverage rather than speed. That’s why it’s important that your mesh router is faster than the conventional router you’re replacing it with, not to mention that mesh units have to stay connected to one another, which could have a negative impact on performance.
On that note, the TP-Link Deco X20 and Deco X60 are up for the task, but in the former’s case, a 500 Mbps internet connection is the most it can handle. That means anything more than that is pretty much overkill, and you’ll be better off with the latter.
Just to lay it all out, the Deco X20 has an AX1800 speed, providing a maximum of 1201 Mbps on 5 GHz. Meanwhile, the Deco X60 ups the ante with AX3000, delivering 2402 Mbps on 5 GHz. Basically, the latter can handle higher rates.
Both also have two Ethernet ports on each one of its units. Thanks to that, it’s easy to get a more reliable wired connection in more areas in your house. It’s worth mentioning that they also feature optional Ethernet backhaul. This lets you connect nodes to one another via an Ethernet cable. That way, you can reserve more wireless resources for other devices instead.
The TP-Link Deco X20 typically has a wider coverage than Deco X60.
It goes without saying that the total coverage really depends on how many nodes are in your setup. The TP-Link Deco X20 has two internal antennas and is usually sold in threes, which translates to 5,800 sq. ft. On the other hand, the Deco X60 houses four internal antennas and comes in packs of two, providing 5,000 sq. ft. of coverage.
To put two and two together, one Deco X60 unit can offer a wider coverage than one Deco X20, but since the latter is more readily available in bundles of three, it offers more coverage for the same price point. Sure, it’s not much of an advantage, considering you could always increase their coverage by purchasing additional units, but if nothing else, it’s an important distinction for the budget-oriented.
It should be noted that your house’s layout determines their coverage as well since obstructions can interfere with signal quality. In other words, it’s recommended to place mesh routers out in the open, which is why they look cleaner and sleeker than traditional routers.
Both the TP-Link Deco X20 and Deco X60 include HomeCare.
Raw performance aside, another reason why users flock to TP-Link mesh routers is HomeCare, and just to be clear, the Deco X20 and Deco X60 both have it.
The main benefits of the software can be summed up in three: antivirus, parental controls, and quality of service. To start things off, the antivirus program consists of a malicious site checker, port intrusion prevention, and infected device isolation, all of which are more or less self-explanatory already. Despite these, it’s still better to observe safe browsing practices, but if nothing else, it’s an extra layer of security.
Next up, their parental controls are fairly basic but effective. Needless to say, you can block certain websites, but the best part is, you can create profiles for every member in your family and set time and website restrictions for each one. In short, you have granular control over what your kids can see or how much time they’ll spend online.
Last but not least, quality of service ensures that your connection is still nice and stable, even if there are multiple devices connected to the network. For instance, you should be able to get a lag-free gaming experience or take a video call in excellent quality, even if someone is using up a lot of resources.
Being more future-proof, the TP-Link Deco X60 is technically better than the Deco X20.
Either one works wonders, providing a fast and reliable connection even with simultaneous connections. That includes a combination of smartphones, tablets, smart home devices, and the like in a single network.
Essentially, the TP-Link Deco X20 can already go a long way and offer excellent stability and coverage, but all things considered, the TP-Link Deco X60 is the better performer since it’s better equipped for connection upgrades down the line. For those reasons alone, it’s worth every penny, even though you’ll have to fork over a bit more cash for it.
While it doesn’t support wireless backhaul, it does have optional Ethernet backhaul.
For 500 Mbps internet connections, the TP-Link Deco X20 is more than enough. It delivers stable connectivity and a wide coverage of 5,800 sq. ft. with three nodes.
Yes, the TP-Link Deco X60 boasts an AX3000 speed with maximum rates of 2402 Mbps on 5 GHz and 5,000 sq. ft. coverage.
The TP-Link Deco X20 typically comes in threes, while the Deco X60 in twos. However, the main difference is the former only supports AX1800 (max speed of 1201 Mbps on 5 GHz), while the latter is AX3000 (2402 Mbps on 5 GHz).
Last update on 2021-05-08 / Affiliate links / Images from Amazon Product Advertising API