Garden

Husqvarna 435 vs 435e II Chainsaw: What Does The New E-Series Bring?

If you’re looking for an all-around, lightweight chainsaw to use around your home or farm, one of the best semi-professional tools you could buy is the Husqvarna 435, a gasoline-powered cutter built for the handy homeowner. Thanks to the success of this model, the Swedish manufacturer released an updated model, the Husqvarna 435e II, to add their latest innovations to their popular chainsaw series. So what exactly does the new e-series entry bring? Read on for a side-by-side comparison.

Husqvarna 435 vs Husqvarna 435e II Comparison Chart

ModelHusqvarna 435 (Renewed)Husqvarna 435e II
HUSQVARNA 435 16in 40.9cc 2.2hp Gas Powered Chainsaw (Renewed) Husqvarna 16 Inch 435e II Gas Chainsaw 
PriceCheck Price Check Price 
Rating
28 Reviews 

69 Reviews 
Power Output2.2 hp, 1.6 kW2.2 hp, 1.6 kW
Cylinder Displacement40.9 cc40.9 cc
Maximum Power Speed9000 rpm9000 rpm
Fuel Consumption652 g/kWh652 g/kWh
Bar Length16 inches16 inches
Weight9.2 lbs.9.2 lbs.
Sound Level102 dB112 dB
LowVibYesYes
X-Torq EngineYesYes
X-Cut ChainNoYes
X-Force BarNoYes

Engine

Both the Husqvarna 435 and 435e II use the same X-Torq engine.

Husqvarna 435 vs 435e II Engine
If you’re shopping for a handy cutting tool to trim, prune, and chop wood with, both the Husqvarna 435 and 435e II will work very well.

Husqvarna saw no need to update the heart of their popular saw. It’s the same 40.9 cc gas-powered engine that delivers 2.2 horsepower at 1.6 kW. This X-Torq engine reduces fuel consumption while lowering the amount of exhaust it produces, meeting international environmental standards. It’s able to output a maximum power speed of 9,000 revolutions per minute, which goes down to 2,900 rpm when the saw is idle. That’s plenty of muscle for any light cutting tasks such as chopping firewood or felling dead trees, which is what this saw is designed for.

Starting either chainsaw should be easy and require less effort due to its SmartStart technology, which reduces the resistance on the cord by 40%. A combined start/stop switch makes operating the saw even more intuitive. You can use either a cold or warm start to get it up and running, with comprehensive instructions for each being detailed in the user manual. Husqvarna notes that factory settings for the carburetor might not be optimal for all conditions, and that manual adjustment might be necessary, preferably by a certified technician. There are full instructions for this in the manual as well, if you feel confident in doing it yourself.

Both the Husqvarna 435 and 435e II use a fixed flow oil pump that automatically releases bar oil as you use it, letting you focus on the actual cutting. Filling up either saw with oil and gasoline is a lot easier thanks to flip-up tank caps, and it also means you won’t have to worry about dropping the cover. You can easily check how much fuel is left through the visible fuel level indicator at the back of the saw.

Handling

The Husqvarna 435 and 435e II are both easy to handle.

Husqvarna 435 vs 435e II Handling
Husqvarna designed the 435 series with the user’s comfort and safety in mind.

Both of the Husqvarna saws have all of the expected design features for a homeowner chainsaw. The front wrap handle feels solid and comfortable in hand, which is protected by the front hand guard and chain brake, and the rear handle has a soft inlay for extra comfort. The ergonomic build also features Husqvarna’s LowVib technology, which add anti-vibration dampeners throughout the tool to reduce operator fatigue.

You can make quick adjustments to the chain while you’re using it by accessing the side-mounted tensioning system using an included scrench. This will let you loosen the bar nut and twist the tensioning screw to your preference. Along with the SmartStart feature, flip-up caps, and quick release air filter, operating and maintaining either Husqvarna 435 model is a breeze. Both Husqvarna models also utilize an inertia chain brake feature in case of sudden kickback, adding another layer of safety in handling an inherently dangerous tool.

The noise levels produced by both chainsaws are roughly similar, and they’re actually pretty close when measured from the operator’s ears. It’s highly recommended to wear protective gear to safeguard your hearing, especially if you’ll be using the Husqvarna 435 or 435e II for long periods of time.

Performance

The Husqvarna 435e II offers improved cutting power over the Husqvarna 435.

Husqvarna 435 vs 435e II Performance
A couple of new cutting equipment come with the Husqvarna 435 e-series II chainsaw.

The two improvements that the Husqvarna 435e II has over its predecessor is the new X-Cut chain and X-Force bar. The X-Cut chain stretches less and stays sharp longer, resulting in at least a 10% increase in cutting efficiency according to Husqvarna. It’s constructed with durability in mind and has been pre-stretched post-production to minimize adjustments. You’ll also find narrow channels in the links which are designed to transport oil throughout the chain, keeping it well-lubricated and reducing normal wear and tear.

The new X-Force chainsaw bar is just as impressive. It features a new center plate design and optimized profile, contributing to a more durable nose. Its bearing system has support shields that enhance productivity and simplify maintenance. Plus, there’s no grease hole to allow dirt to enter the bearings, which also means you won’t need to grease as often.

Expect to be able to cut through logs a bit smoother on the Husqvarna 435e II, but overall cutting performance should be quite similar given they use the same engine. They should be powerful enough to take down 18 to 24 inch trees easily, though care must be taken when attempting to fell larger ones. You’ll be able to cut with more precision though by using the distinct felling marks on the body of the chainsaws.

Verdict

You should definitely get the Husqvarna 435e II chainsaw.

Given that you can find a brand new Husqvarna 435 e-series II at lower prices than the older Husqvarna 435, it only makes sense to go for the newer chainsaw featuring the latest innovations from the trusted power tool manufacturer. The Husqvarna 435e II sports improved cutting equipment parts in the X-Cut chain and X-Force bar, and with everything else being the same, it makes the Husqvarna 435 an outdated model. Perhaps the only consideration to choose the latter over the former is if you can get a nice refurbished unit at a significant discount, but even then you’ll get better peace of mind buying and using a freshly unboxed saw.

Last update on 2019-10-19 / Affiliate links / Images from Amazon Product Advertising API

Related posts
Garden

Husqvarna vs Craftsman Lawn Mowers: Gasoline vs Battery-Powered Lawnmowers

Garden

Husqvarna vs Honda Mowers: Push vs Self-Propelled Lawnmowers

Garden

Husqvarna vs Craftsman: Whose Riding Mower Is Better?

Garden

Husqvarna vs Cub Cadet: Which Riding Mower Should You Buy?