Keeping your floors spotless can be quite a challenge, especially when pets and babies are involved. Fortunately, there are floor cleaners out there that can make the task of cleaning up a less daunting one. If you think you could use one at home, two popular models that are worth checking out are the Bissell CrossWave and the Hoover Floormate. To help you figure out which model is the better pick for your home, here’s an in-depth comparison that covers their design, performance, and ease of use.
Bissell CrossWave vs Hoover Floormate Comparison Chart
|Hard surfaces and area rugs
|Hard surfaces only
|Dual Tank System
|Suction and multi-use brush roll
The Bissell CrossWave and the Hoover Floormate have similar design elements and dimensions.
The Bissell CrossWave and the Hoover Floormate share a similar design, both looking more like a traditional stick vacuum than a mop. They even have the same neon green and grey colorway which lends them a modern feel. They’re not too far from each other when it comes to dimensions either, with the CrossWave just slightly bigger and wider and the Floormate heavier by a couple of pounds.
Aside from similar aesthetics, another thing they have in common is their dual tanks, although their placements are different. On the CrossWave, all of the dirty water and debris that have been collected go into the front tank while the rear tank houses the fresh water and cleaning solution. As for the Floormate, its tanks are found on the sides, the one on the left containing the clean water and the one on the right serving as the dirty storage.
When it comes to controls, both of their power buttons are located on their handles for easy accessibility. As for their cleaning heads, they both sport clear ones so that it’s extra easy for you to see what’s going on inside without having to open anything up. Both models also come with a durable and washable filter which should be cleaned after every session.
The Bissell CrossWave is a more powerful and versatile floor cleaner than the Hoover Floormate.
The Bissell CrossWave and the Hoover Floormate may have a lot of design elements in common but they actually clean very differently. The CrossWave works more like a vacuum, making use of a suction power coupled by a multi-surface brush roll to clean up both wet and dry messes. The Floormate, on the other hand, has no suction power and instead has rotating scrubbers to get the job done. In terms of cleaning power, the CrossWave definitely has the upper hand because it’s able to suck up larger debris. It’s also the more versatile of the two, able to clean both hard surfaces and area rugs while the Floormate only works on the former.
While both models come with cleaning solutions, they have very different methods of applying it. With the CrossWave, you get a trigger which allows you to control the amount of cleaning solution you want to use and it will then be applied directly to the brush roll. As the brush roll spins, all the gunk that’s stuck on it will be deposited into the dirty storage tank. As for the Floormate, the cleaning solution is sprayed onto the floor instead and it will then be absorbed by the rotating scrubbers. That said, the CrossWave’s method is a bit more efficient and less wasteful than the Floormate’s.
Ease of Use
Both the Bissell CrossWave and the Hoover Floormate are easy to clean and have sufficient mobility.
As mentioned, both the Bissell CrossWave and the Hoover Floormate have separate tanks to store their clean and dirty water. This way, you can be sure that you’re always cleaning your floors with fresh water instead of just pushing the dirt around and making an even bigger mess. You do, however, have to regularly empty out their dirty water tanks but it’s pretty easy to do so. They’re detachable and so all you have to do is unlock their latch, bring them to the sink, and throw the water out.
As for maneuverability, both the CrossWave and the Floormate are corded models so your movement might be limited. Their cords are sufficiently long though, the CrossWave’s measuring in at 25 feet and the Floormate’s at 20 feet. This should give you enough clearance to cover your home’s general areas. But if you really want complete mobility and are willing to spend more, you can always turn to the CrossWave and Floormate’s cordless versions.
Choose the Bissell CrossWave if you want power and versatility but pick the Hoover Floormate if you want value for money.Amazon product
When choosing between the Bissell CrossWave and the Hoover Floormate, your decision should be based on your needs and budget. If you need a powerful and versatile floor cleaner and are willing to shell out more, the CrossWave is a good investment for you. Thanks to its suction power and multi-surface brush roller, it’s able to clean both hard surfaces and area rugs and can get rid of larger debris. As for the Floormate, it’s the better option for those who have a stricter budget to stick to and only need a simple floor cleaner. While the Floormate isn’t able to vacuum area rugs, it does a good job of cleaning hard surfaces with its rotating scrubbers.
If you’re wondering how the CrossWave fares against other models, you can check out our Bissell CrossWave vs Shark VACMOP comparison.
The Hoover Floormate has no suction power so it can’t vacuum. It only has rotating scrubbers to clean hard surfaces.
Thanks to its suction power and multi-use brush roller, the Bissell CrossWave can clean both dry and wet messes and is compatible with both hard surfaces and area rugs.
While the Bissell CrossWave is on the pricier side, it’s a worthwhile investment given its cleaning performance, versatility, and ease of use.
Choose the Bissell CrossWave if you want power and versatility but pick the Hoover Floormate if you want value for money.